This lens is about the common error of Limited or No Connectivity Error.
I support home and business users and I have seen this problem several times. After countless wasted hours and headaches. I have a fixed that should work 99% percent of the time. This lens will show how Limited or No Connectivity, (a yellow exclamation mark icon in the lower right hand corner of your screen) should never come back again. Or a least you will know how to fix it immediately.
Visit me at
http://www.crossloop.com/AdwareSpwareTuneupService
Limited or No Connectivity Error
Fixes
Or you getting that Limited or No Connectivity Error
Issues with Norton
I assume that you had connection to your Internet, however even if you have not, this will work either way.
You try this first. Some techs say this will work every time, but I have experience that this does not correct the limited or No Connectivity Error message, every time and if you can not get to the Internet then you need to try my fix.
Follow these steps below.
1. Right click on the local area connection and go to properties in the Network connection's.
2. Just above the OK and the cancel buttons you will find " Notify me when there is limited or no connectivity". Uncheck this box and then restart the computer.
3. After the system reboots. Click on start and then Run and type in cmd and press enter.You will see a black dos window. Type in IPconfig and press enter.
4. Type in ipconfig and press enter.
5. If you get a good ipaddress you are good.
6. Make sure you can get to the Internet.
7. If you are using a router, reset it and try again.
If this does not work you need to contact me at remoteperformancetuneup@gmail.com and I can fix your computer. This is my home based business my website address is www.adjustservices.com. I fix computers on a full-time basis my solutions are fixes not patches. That means you will not have the same issues again.
Another reason why people have so much trouble with their system is because programs do not uninstall properly. Several well know program do not uninstall completely. Poor written programs do not remove all references of itself. Files are left in the register, program files, etc. Just running the add/remove program does not do it. If you run add/remove in Windows XP or Vista you may get dll errors during startup or you system may start looking up. If you have a lot of programs installed and you need the space or you want to clean house. Only remove one program at one time reboot and make sure everything is working. Why risk this allow Perfect Uninstaller to to do the work for you.
Allow Perfect Uninstaller To Take care of thatClick Here!
Click on icon below to get live person to person one on one help now. English Speaking tech help.
