Split Solar Water Heater System with Double Copper Coil

The split solar water heating is an active system, because it uses a pump with a controller to circulate the fluid between the heat pipe series solar collector and the storage tank, tank and solar collector are separate, while the collector is integrated in to the roof of the building, the tank and the pump station can installed anywhere of the building. The piping between the main components is made of brass and a special insulation with high temperature resistance for solar systems.

A Split Solar Water Heater System with Double Copper Coil is suit for climates where there is no risk of freezing. Recirculation freeze protection can be provided by the Recirculation feature in the controller. An Open Loop Water Heating System provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water. The system operates at standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with existing systems.

The main components of Split Solar Water Heater System with Double Copper Coil:

1. ATEliving vacuum tube or flat Solar collector

2. One Solar Workstation including:

Intelligent solar controller with sensors;

Circulation pump;

Pressure meter;

Check valve.

3. Solar pressurized tank with double Copper coil from 100L to 500L

The characteristics:

1. No disorder water tank on your roof

ATEliving split solar water heater is using a high efficiency solar collector on your roof and a high pressurized storage tank in the house. Integrated in to the roof of the building perfectly.

2. Pressure hot water, comfort bathing

It applies pressure bearing design, & in case of switch-on, it shall have pressure hot water immediately with strong water outgoing, large water quantity & flow.

3. Collector part module for freely assembly

Modulus collector component constituted by high temperature special effect pipe, & can be freely assembled as per requirements.

4. Easily to assemble with existing energy source.

The perfect solar collector for domestic hot water heating system can be combined with existing energy source, such as your gas water heater, electric water heater, boiler, etc.

5. Maintenance is convenient and easily.

No water inside the tube, the system can still in service even with several tubes breakage.

6. Completely automatic

Intelligent control with complete function Control system of integration & intelligentization: convenient & quick;

7. Diversification of installation position, perfect combination with building

Heat collector shall be suitable for multi building style with diversification of installation position.

8. Separate type installation; simple & convenient.
Heat collector shall be separated with water storage tank, & water tank position shall have no limit. Standard modularization for fast assembly: easy & quick.

9. Auxiliary heating device guarantees to supply hot water for 7x24

There have an auxiliary heating device--electric heater booster in the tank, so providing hot water in case of cloudy or rainy days.

Auxiliary energy resource interface shall be reserved so as to achieve full day hot water supply with combination of electric energy, fuel oil & gas boiler.

10. Cut out your energy bills

Hot water heating (on average) accounts for 26% of your annual energy bill. With an ATEliving solar water heater you could generate enough solar energy to heat 70% of your hot water, FREE, year after year!