Ways to Improve Gas Mileage
Ranked #9,645 in DIY, #327,281 overall | Donates to Action Against Hunger
Ways To Improve Gas Mileage
Would you like to know right now the ways to improve gas mileage and laugh at rising gas prices, while reducing emissions and preventing global warming?
Did you know that you are able to convert your automobile or truck to a water-burning vehicle ?
Miracles? Nah, You generate free energy by raising the efficiency of your poorly projected engine!!! Your engine utilises 20% of the energy stored in that high-priced fuel and blows 80% for heat, pollution (unburned fuel!) and vibration. You reduce that waste with Water4Gas technology acclaimed as one of the best ways to improve gas mileage.
Water4Gas It is among the most realistic free-energy devices, marked by exceptional simplicity and effectivity.
Read on...
Did you know that you are able to convert your automobile or truck to a water-burning vehicle ?
Miracles? Nah, You generate free energy by raising the efficiency of your poorly projected engine!!! Your engine utilises 20% of the energy stored in that high-priced fuel and blows 80% for heat, pollution (unburned fuel!) and vibration. You reduce that waste with Water4Gas technology acclaimed as one of the best ways to improve gas mileage.
Water4Gas It is among the most realistic free-energy devices, marked by exceptional simplicity and effectivity.
Read on...
Ways To Improve Gas Mileage With Water4Gas Technology
Water4Gas is a technology based on separating water aboard a vehicle, and employing the resultant gases not to drive the vehicle, but simply to increase the efficiency of its combustion.
It's a DIY technology, specifically projected for beginners without any specific tools and very restricted budgets. An operating system can be assembled at home with elementary hand tools for $20-$100, installed in minutes and removed in seconds.
No alterations to the engine, computer or fuel injection systems, so any backyard auto-mechanic can instal it easily.
The technology is antique, over ninety-one years. All that was done was resurrect it from the dead and produce an uncomplicated structure supported on inexpensive hardware. Although there's a countless hydrogen generating projects out there, this is the easiest and as well the securest for the beginner. The electrolyser, bubbler and water source have all embodied combined into one super-simple device.
Other advantage is the utilisation of spiralled/coiled electrode wires, instead of flat plates or coiled plates. The magnetic vortex produced by the spiral aids water splitting, so we do not need as much power from the auto's electric system, therefore simplifying the system even more and bringing down its cost.
3 major elements work together to induce water splitting: direct electric current flowing by the electrode cables to the water, the magnetic vortex produced by the configuration of the electrodes, and the vacuum supplied by the engine itself.
The consequences of this technology are lowered emissions and improved gas mileage, merely due to a more accomplished combustion. Nowadays internal combustion engines suffer from low efficiency by 20%-25%, as any auto-mechanic will tell you; 75%-80% of the gas, rather than being converted to forward movement, is instead converted to pollution and carbon deposits, heat (global warming), vibration and noise.
The principal problem is large fuel droplets in the mixture. The Hydrogen, being a miniscule atom, hits a droplet, cuts it into tinier droplets and ties itself to the tinier droplets. Now the purer, hydrogen-enhanced mixture, is adequate to burn more thoroughly.
On top of better performance, the engine steam-cleans itself daily, and the subsequent effect is smoother and softer operation.
This technology isn't capable of running a automobile on water exclusively. The intention is not to replace gas but to enhance it and open the door and the mind to the hypotheses of waterfuel technology. With proper tuning we can double the gas mileage, generating a new energy equilibrium: one-half gasoline, one-half water. Very little water is utilized, in an economy automobile it is about 2700 miles per gallon of distilled water, together with 4-6 teaspoons of household baking soda as catalyst. It has been demonstrated that the fuel consumption of a 4-stroke generator can as well be cut in half with this technology.
Not all automobiles, loads and driving circumstances will gain the same, evidently. You shouldn't build up expectations for more than 10%-50% improvement in fuel economy; nevertheless there are every day success stories from experimenters who are experiencing gains of 80%-100% in different vehicles.
At the time of writing the technology is just for gas and diesel autos and trucks.
It's a DIY technology, specifically projected for beginners without any specific tools and very restricted budgets. An operating system can be assembled at home with elementary hand tools for $20-$100, installed in minutes and removed in seconds.
No alterations to the engine, computer or fuel injection systems, so any backyard auto-mechanic can instal it easily.
The technology is antique, over ninety-one years. All that was done was resurrect it from the dead and produce an uncomplicated structure supported on inexpensive hardware. Although there's a countless hydrogen generating projects out there, this is the easiest and as well the securest for the beginner. The electrolyser, bubbler and water source have all embodied combined into one super-simple device.
Other advantage is the utilisation of spiralled/coiled electrode wires, instead of flat plates or coiled plates. The magnetic vortex produced by the spiral aids water splitting, so we do not need as much power from the auto's electric system, therefore simplifying the system even more and bringing down its cost.
3 major elements work together to induce water splitting: direct electric current flowing by the electrode cables to the water, the magnetic vortex produced by the configuration of the electrodes, and the vacuum supplied by the engine itself.
The consequences of this technology are lowered emissions and improved gas mileage, merely due to a more accomplished combustion. Nowadays internal combustion engines suffer from low efficiency by 20%-25%, as any auto-mechanic will tell you; 75%-80% of the gas, rather than being converted to forward movement, is instead converted to pollution and carbon deposits, heat (global warming), vibration and noise.
The principal problem is large fuel droplets in the mixture. The Hydrogen, being a miniscule atom, hits a droplet, cuts it into tinier droplets and ties itself to the tinier droplets. Now the purer, hydrogen-enhanced mixture, is adequate to burn more thoroughly.
On top of better performance, the engine steam-cleans itself daily, and the subsequent effect is smoother and softer operation.
This technology isn't capable of running a automobile on water exclusively. The intention is not to replace gas but to enhance it and open the door and the mind to the hypotheses of waterfuel technology. With proper tuning we can double the gas mileage, generating a new energy equilibrium: one-half gasoline, one-half water. Very little water is utilized, in an economy automobile it is about 2700 miles per gallon of distilled water, together with 4-6 teaspoons of household baking soda as catalyst. It has been demonstrated that the fuel consumption of a 4-stroke generator can as well be cut in half with this technology.
Not all automobiles, loads and driving circumstances will gain the same, evidently. You shouldn't build up expectations for more than 10%-50% improvement in fuel economy; nevertheless there are every day success stories from experimenters who are experiencing gains of 80%-100% in different vehicles.
At the time of writing the technology is just for gas and diesel autos and trucks.
Water4Gas Ways To Improve Gas Mileage Clickhere To Learn More
New Guestbook
Like this lens? Want to share your feedback, or just give a thumbs up? Be the first to submit a blurb!
News About The Ways to Improve gas Mileage
Fetching RSS feed... please stand by
