Astronomy Telescope

Ranked #21,422 in Sports & Recreation, #518,840 overall

Astronomy Telescope Tips

In 1934, a small group of young men, imbued with a mutual interest in astronomy and a curiosity about the tools of the astronomer, organized themselves into the New York Telescope Makers Association. With the erection of the Hayden Planetarium in 1935, a new focal point of astronomical interest was created for the New York metropolitan area. Shortly thereafter the telescope making group became a part of the Amateur Astronomers Association and you can learn the following:

  • The story of the telescope—discover what was first used to view the stars, the moon and 5 other planets.
  • Easy instruction ... you will follow easy instructions on how to assemble each section step by step.
  • Insider information on how to 'grind the lens' and spherical surfaces on the glass. This is a very specialized technique.
  • Where to find all the materials and tools you'll need to build your telescope. You'll be shown where to find cheap and sometimes free materials.
  • The pitch lap—this can be a bit dangerous, so you'll be shown the correct and safe way to do it. Get this wrong and you could get burnt very BADLY.
  • To test, correct and polish—at this stage you'll have to be very precise so as to get the mirrors just right. Without the right reflection, your telescope just won't work.
  • How the 'Paraboloid' works and how to get the angles right. Discover how to get the curve to its correct 'sphere.'

And there's loads more:

At this point, you might be wondering how you can get your hands on a copy:

Well, here's the good news, to learn more about astronomy telescopejust go to this website:
http://www.astronomytelescope.net/

The Astronomy Telescope | Mirror Grinding

It is assumed that a cellar or other room in which the temperature is fairly constant is available. Grinding, even polishing, might be done almost anywhere, but testing and figuring can be carried on only under conditions of uniform temperature.

Strokes

There are three motions that the optician must employ in order to preserve a surface of revolution on his mirror. First, the back-and-forth grinding stroke produces the curve. Second, the mirror must be rotated in order to produce this curve on all diameters. Third, the worker must walk around the barrel (or the tool must be rotated) in order to employ all diameters of the tool. While the directions of these last two motions are not important, they must not occur in unison, and for this reason it is perhaps safest if they are counter to each other. It is not necessary that any of the motions be performed with machine-like regularity, nor is it necessary to run oneself dizzy in their execution. Take six or eight strokes, rotate the mirror a trifle and shift to a new position where another six or eight strokes are taken, and so on.

astronomy telescope

Fig. 22. The long stroke formerly used in rough grinding

The lengths of the strokes should look like this:


Want to learn more about astronomy telescope just go to this website:
http://www.astronomytelescope.net/astronomytelescope04.php

The Astronomy Telescope | We Go to Work

The upper edges of the tool must first be beveled all around for about 1/16", with the coarse carborundum stone. The stone can be applied vigorously to the tool, and if a few small chips are knocked off, which is unlikely, it does not matter. Later, as the surface is ground down, causing the edge to become sharp again, the beveling should be repeated. This is important, so that during grinding chips will not break off and get between the disks, causing scratches.

Have the pail of water placed conveniently near. Shake a few drops of water on the barrel top, and place on it several sheets of newspaper, with sprinkles of water applied between them, and lay the tool in the center. The wet paper will provide enough adhesion to prevent the tool from sliding about during grinding.

astronomy telescope

Fig. 24. The conventional method of rough grinding

Apply some No. 80 carborundum around this area:

Want to learn more about

astronomy telescope just go to this website:
http://www.astronomytelescope.net/astronomytelescope04.php

Astronomy Telescope Amazon Plexo

Astronomy Telescope Stuff on eBay

Loading

by

ChristinaDee

Have you ever wondered how to make your own astronomy telescope? With our easy-to-follow blueprints youll be gazing at the stars in-no-time-at-all. more »

Feeling creative? Create a Lens!