Fabric Grain in Sewing

To understand the grain, you need to understand these basic terms.

Think of a bolt of fabric. When you purchase a yard or metre, the material is pulled from the roll and laid out for cutting.





Selvage: This is the side edge on the bolt. These edges have a different texture, do not fray and often have a manufacturing stamp on them. You should not lay pattern pieces to include these edges.

Cut Edge or Fabric End: This is the end of the fabric which has been cut off the bolt and may or may not fray depending on the type of fabric.

Lengthwise Grain: runs parallel to the selvages and does not stretch.

Crosswise Grain: runs perpendicular to the selvages and has a slight amount of stretch.

Bias: runs at a 45 degree angle to the selvage and is very stretchy

The Fold: Wide fabric is often folded in half down the middle to fit the roll; the two selvage edges are together.

So you have a length of fabric with two selvage edges and two cut edges and it may or may not have a fold.

Consider two front pieces on a dress or blouse. If you lay the left front piece on the lengthwise grain of fabric and the right front piece at an angle to the first, one will have a slight stretch and one will not. When you wear the finished garment, there will be a noticeable difference in the way the two front pieces hang. One front piece will have stretch one way and the other piece will have stretch a different way. This is why it is so important to lay the fabric pieces exactly where the arrows on the pattern pieces indicate.

Before you begin sewing or pinning pattern pieces, always wash or dry clean your fabric. It may shrink and, of course, it is better to shrink the fabric before you sew than to have it shrink after you have made your garment. Once this has been done, proceed with the next step and check the fabric grain.

An easy way to test the fabric grain is to fold a piece of fabric in half lengthwise and pin the selvage edges together. If the fabric lies perfectly flat, the grain is perfect. When you purchase fabric, it is important to lay it out and be sure that it is perfectly flat. Adjust the cut ends, not the selvage ends.

If the selvage edges are perfectly aligned and the fabric still does not lie flat, you can try two methods to straighten:

A. With the selvage edges pinned together, use a steam iron and starting at the selvage edges, push the iron toward the fold. (use this method on the wrong side of the fabric

B. If there is a noticeable pucker, you can pull the fabric on the bias in the direction it needs to be straightened.

Please visit KarensVariety.com and enjoy shopping in my store where you will find a large selection of patterns and pattern books, both new and vintage. Choose patterns which are mailed to you or patterns which are downloaded instantly in PDF format. The selection changes regularly so please sign up for the monthly Newsletter and receive FREE patterns, articles and special offers. You will also receive a weekly notice of New Listings. Enter the monthly Contest.