FIX Xbox 360 3 Red Lights - DIY Guides for fixing Xbox 360 3 Red Lights problem

The Xbox 360 Uncloaked

Editorial Reviews
CliffyB, Epic Games
"This is riveting journalism from an unbiased source. Takahashi provides a rare peek behind-the-scenes of the rollercoaster video games business."

Rob Wright, TwitchGuru.com
"You could argue that no one outside of Microsoft knows more about its Xbox game business than Dean Takahashi."

The Top Xbox 360 Repair Guides That Will GUARANTEE A Permanent Fix For Your Console In Under 1 Hour!". It show you How to Fix XBox 360 Ring of Death.

These guides have been tested and will fix all major problems withyour Xbox 360 including: 3 red lights, 1 red light errors, 2 red lightsand even fix your DVD drive if it is not playing games!

So check out the reviews below and get your Xbox 360 repaired today from home, fast and easy

Xbox 360 Wireless Network Adapter

Product Features

* Highly versatile and supports 802.11b, 802.11g, and 802.11a
* Powered seamlessly by your Xbox 360 gaming console, so there's no external power adapter to plug in
* You can transfer high-definition video and CD-quality music from your Media Center PC to your Xbox 360 via 802.11a wireless media support

1. Open Xbox 360 Case

Remove the Front Face Plate from your Xbox. At the front of the xbox 360, insert your thumb into the door that covers the two USB ports. Squeezing the upper and lower sides of the face plate, pull out the face plate. Remember, don't force it.

You will see a Microsoft sticker, remove this! Remove both grey plastic endplates, follow by four clips locking the top half of the case to the bottom half.

Continue to remove rest of cover until you get to the same picutes as the picture shown

2. Removeing and Preparing the Heat Sinks.

We going to reaffix the heat sinks using a method that will give more uniform support.

First, we have got to get the X-clamps off.

2.1 Use a terminal driver, pry off each corner of the clamp on the underside of the motherboard PCB.

2.2 Once both clamps are removed, flip the board over and you will be able to gently lift up and remove the two heat sinks.

2.3 Remove four fixing bolts from each of the heat sinks.

2.4 Clean any residue of the thermal compound from the heat sinks and the top of processors.

2.5 Use alcohol with a cloth to bring the underside of each heat sink up to scratch.

2.6 Use alcohol to remove the residue on the processors.

2.7 Apply termal compound to either the top of the processor and the heat sinks.

2.8 Re-fix the heat sinks.

2.9 Close by the cover.

And your Xbox will be back to alive!! If you need a full details with step by step with picture guide, Just take the XBox 360 3 Red Lights fix here!