Home » Home & Garden » Home Improvement » Other Home Improvement

Graco Airless Paint Sprayer

0 Comments

13 Like

Like 13

Pin It

Ranked #2,928 in Home & Garden, #35,292 overall

Airless paint sprayer gun, perhaps the only professionals who really understand the system works. However, systems such as the painting is actually very beneficial, even for individual use at home. One advantage is the process of painting it only takes one to two times the spray, so that time spent a little more. It was produced due to fogging of paint that does not require wind. One product of this system is superior Graco, just so happens that there is currently a big discount.

Graco X5 is Suitable for Individual Use

Compact portable design, the Graco Magnum X5 is suitable for housing projects or minor, like changing a regular house paint. Lightweight, portable, and easy to use, three things are suitable for novice users. Pressure Control Knob allows you to easily set the proper pressure for spraying or rolling. If you buy in Amazon, you save 27 percent.

Airless System

Airless system is fogging or atomizing process is due to the hydraulic pressure in the paint that is transported to a narrow slit (nozzle or tip) to the spray gun resulting in fogging. Hydraulic pressure generated by the airless paint pumps. To be able to fine atomization, airless system requires a minimum hydraulic pressure of 70 bar.

Graco Hi-Boy Cart Airless Spray

Airless Advantages:

1Jobs more quickly because the atomization of the paint alone (as the name implies means airless fogging without wind).
2The same thickness, suitable airless spraying is used for a wide field and a lot of work, especially work that requires speed.
3Transfer efficiency is much better than spray water, about 50%.
4Suitable used for spraying paint a relatively hi-build and high-solid contents.

Graco Airless Paint Sprayer Kits

Airless Disadvantages:

1The system is not flexible, do not paint the pressure settings can be set on the spray gun, but the setting is located on the paint pump. So is not too wide spray angle can be adjusted (already fixed according to the size of the tip / nozzle). To change the width spray angle, nozzle tip or replacement is required.
2The results of the resulting painting is not as smooth as water spray for high pressure and atomization that contain no wind. Therefore, the results sometimes resembling an orange peel or orange-peel. To avoid or minimize the orange-peel technique is required that either the pressure setting is aligned with the corner too wide spray angle and spray distance. Everything should be in tune to get great results.