Ceramic Tile - How To Lay Ceramic Tile

Basically, there are two types of ceramic tiles. The first type is the glazed and the second type is porcelain. The glazed ceramic tile type is one that is suitable for heavy traffic areas, such as the living room or the kitchen. On the other hand, the porcelain ceramic tile type is suitable for bathrooms. You have to remember that porcelain is much more expensive than glazed tiles. So, you might want to consider measuring the room you plan on putting porcelain ceramic tile type first in order for you to estimate how much you will be spending for the tiles.

In order for you to properly install ceramic tiles it is important to remember that the underlayment or the foundation is critical. You can tile on different surfaces, such as linoleum, tiles, and even concrete. In all cases, it is very important that you first make sure that the floor is level and that it is free from dust and debris before you install the tiles. If the floor isn't leveled, you may want to get some leveling compounds and apply it.

To prepare the site you plan on tiling, try laying out the tiles first. This will give you an idea on how it will look like once you are finished and it will also give you an idea on how to lay or position the tiles better. If you now know what you want, the next step is by removing the tiles and get ready to install the tiles.

Again, it is important to make sure that the work area remains dust free and debris free.

Watch Randy's videos CLICK HERE

When applying the adhesive, make sure that you start at the center and apply enough material to cover 6 square feet. It is very important to apply the adhesive on a step-by-step basis as covering the entire room will get the adhesive to harden up even before you install the tile.

If you need to cut some tiles, you may want to use a wet-saw. It can cut tiles accurately and it will also save you a lot of money by not making a lot of mistakes, such as making bad cuts or breaking the tile with another kind of cutting tool.

After installing all the tiles, let it sit for 24 hours to 48 hours before applying grout and walking on it.

After applying the grout, let it sit for another 24 hours. After this, you are now ready to walk on it and admire the beautiful work.

Have you ever watched someone lay tile? It's really not that hard once you know the do's and don'ts.The tricky part is not making any mistakes. There are some mistakes that may seem small but can cost you the entire job.

Watch Randy's videos CLICK HERE

He is absolutely right when he says that learning to set tile is as easy as watching his video and doing it yourself. There is nothing to it!
Especially when using the shortcuts Randy is going to reveal to you in his videos, any tile job is easy!
Plus... the videos really aren't that long. Sure, Randy could have filled them up with tons of fluff to impress you but that's not what you want, is it?
In each video he gets straight to the point and walks you through it step by step. Randy gets straight to the point so that you can literally watch as you lay your own tile while getting the job done quickly and effectively!
There is simply no reason for you not to check out his videos. Everything you could possibly need to know about setting tile is just a click away.

So If you want to learn how to install ceramic tiles and watch Randy's videos CLICK HERE