How To Make A Solar Panel

Solar panels could be easily made at house by making use of diy (do it your self) home made solar panel tutorials, which are accessible on the internet today, or using kits which are easily accessible at electrical shops today. Those that have previous experience of fixing up electrical equipments at house will find this job of making their own solar power panel at home very easy, even though in the event you have a great guide, then there should be no problem.

How To Make A Solar Panel?

A solar cell makes up a solar power panel, so you need to know on how to make a solar cell. The needed elements in making your own solar panel are :

- sheet of copper

- two alligator clip leads

- a micro-meter that is sensitive enough to read currents between 10-15 micro-amperes

- an electric stove

- table salt, tap water, sand paper, and sheet metal shears

Now you need to slice a piece of the copper sheet using the exact size that of your electric stove. Clean up the copper sheet for any possible traces of sulphide or other corrosion.

Heat it on the burner then when it becomes red-hot, the copper sheet will undergo color changes from pinking red to brown, and finally becoming a thick layer of black coat over it.

Then the stove and the copper sheet should be cooled off gradually. A layer of soft red cuprous oxide will be left over the copper sheet. Resist the temptation of removing all the black spots because this may harm the red cuprous oxide which is needed to make the solar cell work.

Then this sheet of copper ought to then be joined together with another sheet of copper of the exact same dimension. Use the alligator clips to join the two sheets with each other, and place it into a wide-mouthed jar or bottle. Make certain that the two sheets to not get in touch with every other. The copper sheet with red cuprous oxide ought to be connected to the negative terminal, and also the clean copper sheet could be joined to the positive terminal. Saltwater should cover the bottom of the plates, however the clips of the two sheets at the top should be left dry.

The above mentioned procedures addresses the question on how to make solar panels at house. This can be used to create electrical power from the heat of the sun.