Increase Gas Mileage Using Water

Gas4Free.com



You can adjust size and your cell plates. Add or subtract cell plates to meet your demands. Also this gives you the ability to add neutral plates, which I talk about further down in the lens.
This is a neet fuel cell guide that has customizable sizes, which is great for output and fitting tight, under the hood, spaces.
These plans are made by an engineer, but they aren't over engineered. This is well thought out design.
They explained in detail how to make and maintain the fuel cells.

*Plate cell design
*Easy and less maintenance
*Great HHO output
*Customizable sizes and outputs

Gas4Free.com

HHO(hybrid hydrogen oxygen) is made from water by electrolysis. The gas produced adds miles per gallon, horsepower, cleans out carbon and results in a cleaner emission.

HHO is mixed with your current fuel ratio (14:1) through the intake manifold. The result is a more efficient burn of your fuel. Your current combustion cycle doesn't use all of the fuel. Introducing a fuel heater and adding hydrogen will greatly improve fuel efficiency.

Even high MPG vehicles can benefit. The unused fuel is processed in the catalytic converter (1975). Hmm... same time MPG deregulation occured... When you utilize HHO your burning this otherwise wasted fuel, this explains the higher MPG, HP and cleaner emissions. This works with gasoline or diesel. This is a fuel additive that increases fuel efficiency. This is hydrogen on demand.

HHO has a cooler burning flame. As soon as you introduce HHO into your intake, you'll notice a smoother idle. Your engine will immediately run smoother and cooler. The cooler burn is minimal, but the immediate effects are very clear. You get the benefits of higher octane gas without having to pay the price. Your price is the cost of water. Yes water can get you down the highway further for your buck.

The fuel cell pulls power from your battery, just like your windshield wipers, radio, ac, fuel pump, lights etc... The difference is that this fuel cell is adding an 80% efficient gas to your combustion cycle. Your utilizing otherwise wasted fuel. When your adding MPG tell me where your wasting energy?

Gas4Free.com

*Beat The Heat*
The heat is from conductivity, your catalyst adds conductivity. Adjusting your catalyst will also assist your HHO output and control heat buildup. A sure fire way to reduce the heat is to add neutral plates between your positive and negative plates, this acts as a resistor and reduces your heat/ amp pull. PWM (Pulse Width Modulators) are a good choice, if your running a custom cell and are having trouble reducing pull.

Above all else, use the technology save some gas, and help our environment.

** Beating the Freezing **
If you just run your cell, it will thaw. If you don't want your cell to freeze at all, you can add the denatured alcohol, or just use some quick connects and bring your cell inside with you. These HHO fuel cells are not harmful like batteries or chemicals.
Adding 20% denatured alcohol will keep your water cell from freezing and won't interfere with HHO output.
Now fire up your snowmobile and enjoy!

This applies to plate cells, that pull too much IMO...
**DON'T FORGET TO CHECK YOUR WATER LEVEL!!**
Check your water level every 2-3 hours, remember your now burning water for fuel!
Just keep your cell full and you'll enjoy the benefits.

*Getting More HHO Without More Catalyst Or Draw*
I've noticed the HHO bubbles would come from nicks or scratches on the plates/wires. Whether your using plates or wires, this will work. Create more surface area on your plates or wires. Use 80 grit sandpaper and rough up your positive plates/wires.
The best method is to go in opposite directions, creating a cross etching. Now you've got more surface area for your HHO! Enjoy!

Can you cut your gasoline expenses in half?

The true answer is " I don't know." But WAIT ! There are too many variables to know if your specific engine will increase mileage by 50%, some can increase up to 70% !, but the answer for your specific engine is this " You may get 5 more miles per gallon, you may get 25 more miles per gallon, but your expense is the cost of water." Is that fair enough? You will add miles per gallon with any internal combustion engine, gas or diesel. Even lean burning engines can benefit and become more efficient.

The technology for hydroxy gas is not new, it's far from new. These fuel cells have been around since the mid 1950's, and they work. Not only do they increase miles per gallon they increase horsepower. I'll explain how these hydroxy fuel cells add miles per gallon, increase horsepower, clean out carbon deposits, and reduce emissions. Lets start with efficiency.

Why Making Hydroxy Gas Is Efficient

Have you ever noticed a drop in miles per gallon while driving at night? Well, your running your headlights at night... hopefully. Do your headlights draw enough power to decrease your miles per gallon? No they don't and here's why. Your alternator is already in motion, as soon as you start your engine, your alternator rotates too. This is already a draw on your engine and remains a constant. When you turn on your headlights it doesn't exceed the amount your alternator is already cranking out. Therefore you don't notice a drop in miles per gallon. You can crank on your air conditioner compressor and immediately notice a drop in power and efficiency, so there are limits. We're talking about 12v @ 15-20 amps, well within your alternators capacity without engine sapping draw, and yes you can use your headlights and run a hydroxy fuel cell.

How Hydroxy Gas Adds Miles Per Gallon

Hydroxy gas is made from splitting water into an hydrogen and oxygen mixture, which is much more powerful than either element alone. I explained the power to do this can be accomplished efficiently. Your using power that's already a draw on your engine. This combustible soup, when added to your current engines intake, makes a super efficient fuel additive. The results are immediate, besides the increased miles per gallon, you'll notice a smoother cooler running engine. This is due to the increased octane from the oxygen and the reduced flame combustion temperature from the hydrogen. Not only is your engine going to run like it's burning premium octane, your going to be using a lot more of the fuel you bought. Hydroxy gas allows for a more complete burn of your fuel molecules. Your current combustion process doesn't use all of the fuel. A lot of your fuel is unburned and is reduced by your catalytic converter. Hydroxy gas puts all of that otherwise wasted fuel to work.!
Your paying for fuel to waste it, and then your paying again to dispose of the waste. Kinda like a double whammy, but not when you use hydroxy gas, you'll be amazed at how much fuel you previously wasted when you see the added miles per gallon.

GiddyUp! Hydroxy!

A smoother more controlled burn of your fuel means added efficiency and added power. They don't call them boosters for nothing. How much horsepower depends on your Hydroxy saturation. Your normal 14:1 fuel ratio should not exceed 4% hydroxy saturation. This keeps all the mechanics computers timing etc.. the same without having to do manual adjustments, of course leaning your fuel back will further increase MPG, but we're keeping things simple in this explanation. Pilots can lean their fuel back at 14k' when atmospheric pressure is right, you can do the same with hydroxy without flying, but lets keep our feet on the ground for now... one step at a time. The simple explanation is "You will notice a boost when you accelerate".

Icky Gicky Carbon... Pass The Pumice Soap

Carbon is the byproduct of an inefficient burn, so hydroxy will immediately stop carbon buildup. The buildup will also be removed by the water vapor. Your engine already creates water it's part of your emissions due to the burning of hydrogen that's in your fuel, your just adding more hydrogen thus increasing water vapor. This added vapor is what is replacing the caustic acidic emissions you regularly emit. This water vapor is far less damaging than carbonic acids. Your replacing those byproducts of inefficient combustion with hydrogen, which leads to water vapor. You don't have to worry about hydrogen embrittlement because the hydrogen saturation isn't enough, plus alloys like tungsten etc.. are more likely to be damaged than steel. All you get is a cleaner more efficient engine as the result of burning hydroxy gas. You get more miles per gallon, added horsepower, cleaner emissions and a more efficient engine from the removal of carbon. That's hard to beat for the price of water.

Since you've read my information, here's a dirty little secret that will increase your fuel cell efficiency. The best little EFIE that has millivolt control. You can zero in your fuel ratio.

Thank you for reading and taking an interest in this technology if you've found this informative feel free to leave a comment.
Brandon

Gas4Free.com

Those sticky fuel molecules are robbing your efficiency. Using a gas heater before ignition will optimize your fuel. When you combine hydrogen into the mix, your going to notice some great results!

Getting the fuel hot before ignition breaks the molecules up, this allows for more efficient combustion. There are things that add to efficiency like hydrogen and other additive BUT..

Acetone, noted for being a fuel additive works against hydrogen, while xylene works well with hydrogen. Adding a fuel additive like xylene to heated fuel and adding hydrogen to the mix will show you major results. Once you have done this, you'll be amazed at how far you can lean back your fuel.

Now go have some FUN!