Interlock Driveway, Walkway & Patio Sealing | Info & Tips | YSeal.ca

For more information, visit http://www.YSeal.ca

Even after your interlock stones have been worn down and abused, they can still be restored to their original beauty after proper treatment of washing and sealing.

Sealing your interlock driveway, patio, or walkway doesn't need to be complicated! Let us walk you through our simple 3-step process to make your interlock look like new: Washing, Sanding, and Sealing.

Step 1: Washing

The Washing step is often under-emphasized which leads to major blemishes once the finished product is complete. We take care to thoroughly power wash your interlock with our high-pressure industrial power-washer to ensure meticulous cleaning. On top of that, we also include a soap wash and scrub to further guarantee that your interlocking stones are free of all the old grime and dirt that used to cover them!

Stains on your interlock can usually be removed: oil, gum, gas, etc. Some stains are more stubborn and require heavy chemical treatment to be removed, for example rust stains. Careful though, these cleaners are powerful enough to discolour your bricks where applied. It is important to test any extremely strong cleaner being used on your interlock prior to applying it!
After your interlock has been given a wonderful wash, scrub and rinse down, we allow the surface to dry completely before we move onto step 2.

Step 2: Sanding

After the Washing phase, your interlock will have no jointing sand remaining. It is necessary to replace this sand with new, fresh and strong polymeric sand before moving onto the final step.

Polymeric sand is jointing sand mixed with polymers specially formulated to fill the joints in pavers and stones. We gently and carefully sweep new sand of the appropriate colour into each joint, pushing the excess around to make sure they are all filled.

After gently blowing the remaining sand off the surface of the interlock, the polymeric sand is dampened to activate the polymers. This is the magic step that will solidify your interlock and will protect against weeds, moss, ant hills and loose stones.
Once again, we wait for the surface and joints to dry completely before proceeding to the final step.

Step 3: Sealing

Now that your surface is sparkling clean and completely solid from our polymeric sanding, it is finally ready to be sealed.

We use a top-quality commercial grade VOC-Compliant Solvent-Based sealer for all of our jobs. We can apply your choice of natural look, regular shine or super shine. Each finish is equally as strong and provides the same amount of protection.

We use a high-pressure sprayer to apply the sealant. Spraying the interlock allows for an even, uniform and thick coat of sealant, all while better penetrating the interlocking stone. This allows for improved curing and better protection from harmful and damaging factors.

We apply two small coats as opposed to one thick one. Once the first coat has been applied, we allow it to dry completely before doing the other. For surfaces that have been sealed in the past, one coat usually does the trick. You should be aware that over-spraying causes major problems such as peeling, bubbling, slippery surfaces and other negative effects. It is appropriate to take heed of the old saying "too much of a good thing", as it applies here.

Once the final coat is applied, we put up ribbon to prevent any undesired traffic and you can watch as the sealant dries, cures and transforms the look of your old worn out bricks. Our sealer will provide a beautiful gleam and will brighten your property instantly. On top of that, sealing will give a formidable barrier of protection to your interlock.

Sealing your interlock with YSeal:

- protects against oil and other stains
- prevent UV wear down from the glaring sun
- prevent daily breakdown from regular use, parking, furniture, etc.
- provide protection from the extreme winter & summer weather
- give pavers a brighter-than-new look
- boost your curb appeal
- instantly increase the value of your home

Sealant usually lasts 2 to 3 years depending on the amount of traffic and use. As a rule of thumb, interlock driveways are recommended to be sealed every two years, while interlock patios and walkways can be done every three years.

There you have it, a complete check-list of how we will help you transform your home into what you deserve.

Call today: (416) 436 7559
Email: info@YSeal.ca

Visit our new and often updated website for all the information you need: http://www,YSeal.ca

Let us transform your property and protect your pavement.