Motor Drag Video and Foto 2011

Photo Credit: flickr.com - Labeled as Creative Commons-licensed content for commercial use, adaptation, modification or building upon.

It's quite easy to prepare your motorcycle before the drag race. You can use water as a substitute for ethylene glycol coolant. Make sure you fill the gas and the oil for your engine. Use about 20 to 22 pound of air in your rear tire. I order to get lower bike, you can drop the triple clamp on the fork stanchions. When you do this make sure the fender or front wheel does not touch the radiator.

The complicated part is when you lowering the rear. You need the right height adjustment for the rider. Tips you could use is lighten up the preload. In order to kill your engine when you fall, you will need to rig a tether.

Motor Drag modification is becomes a trend in the modifier community lately. Mio Automatic motorcycle particularly, since it easier to be modified and the structure of this bike is quite elegant.

Automatic Mio Motorcycle Engine

Engineering Yamaha Mio engine cylinder capacity for drag purpose has lot of variety. Moreover, the spare part for the Mio motorcycle for racing purpose is easy to get on the market.

Some modifiers are doing experiment using a square technique which balanced between the bore and the stroke or use overbore method which shortening the piston than the cylinder diameter.