Inverter for Wind / solar power no brownouts/ever

New advances in wind and solar power control will stop brownouts and let you decide what to do with the power you are producing . Even over the net.  .A green smart Inverter controler.



It is a combined pure sine inverter. a grid tie inverter, and charger, it will also act as a ups .So never worry about brown outs again .
It can charge multiple battery banks and has multiple inputs for generators, wind and solar PV.  And whats great is that it can all be controlled over the net .
Being launched in the next few weeks the first model will be a 5000watt, good for the average home and at a cost of around 3000.usd.
There will also be launched a complete system with everything you need 5000watt of solar pv, the power controler, batteries, and instalation for around the 10.000 dollar mark .
This box of tricks will certainly cut down on wiring has multiple inputs.and outputs ,and will appeal to a lot of of diy enthusiasts and professionals alike.
Will be invaluable to businesses that suffer from brownout effects across the globe .The fact that it will cut in within milliseconds will make it a popular choice with companies running servers and pcs ,also for hospitals and schools.
During low load periods all the small wind and solar producers could get their batteries charged up at a lower cost via the national grid, and then sold back to them when demand rises for power .Any questions please feel free to ask .steve g ...THIS ITEM WILL BE ON SALE IN OUR SHOP SHORTLY Please click the link below to buy now .
Wind turbine shop
A 500 watt windturbine
for delivery times ,stock ,instalation ,please email
Stephensteve1717@aol.com or visit our shop click the link below
Wind turbine shop

The 500W wind turbine is supplied as a complete kit. The only other things you will need to install this unit are: a set of deep cycle batteries (which we can supply, if required), and cement for the foundations.

The following items make up the 500W wind turbine kit:

Tie-wrapped:

3 section tower, labelled upper, middle and lower (each 2m long):
Tail-section including 6 bolts for fin;
3 blades;
BOX2:
Footing for the tower, including pivot
bolt;
Wind turbine body including cabling
and bolt for tail;
Blade hub with 6 bolts and restraining pieces
Fin;
A nose cone;
3 catenary wire pieces for stays;
6 U bolts to secure catenary wire;
2 round spikes for securing footing;
3 angled pegs to secure catenary wire to ground;
3 turnbuckles with hook and eye ends;
BOX 3:

Rectifier/regulator unit
BOX 4:

A 36v power inverter (500w)

How to wire up the 500w (36v)wind turbine:

Stats

Rated Power Max Power Voltage Start Speed Rated Speed Max Speed
No. of Blades Rotor Diameter Rotor Speed Tower Height Generator type Shipping Weight
700W 36v 3 m/s 8 m/s 40 m/s
3 2.7m 400rpm 6m 3phase
100kg

The above is a complete DIY kit ,

If you are interested in buying this item then please visit our shop.
Wind turbine shop
Or call / email stephensteve1717@aol.com or tel steve at windselect 0033 553 588709 anytime 24/7