Camera Basics - Part 1

Get to know your camera

The technical side of photography is not difficult to grasp; anyone who wants to learn can do so. For a basic understanding of the camera and photography there are only four areas that you must understand to move forward. These are:

1. ISO
2. Shutter Speed
3. Aperture
4. Lighting

The first 3 are associated with the camera you are using and the last is what we use to create a photograph with, light. Once you have these concepts under control, you are ready to explore the next stages in your photography.

With these four areas, it does not matter whether you are using film or digital, the concepts remain the same. Digital cameras are the same as film cameras; the media is the only difference.

In addition, when you understand these concepts, you can take your camera setting off automatic and switch to manual. This will give you the control you want and need.

1. ISO

ISO is an acronym for International Standards Organization. It was previously known as ASA, or American Standards Association. It applies to both digital and film cameras.

Again, if you have your camera on automatic, the camera may select the ISO for a given situation, and provide you with a less than satisfactory image.

Getting your exposure correct is vital to making better looking photographs. The solution is to get the shutter speed, aperture and ISO settings working together smoothly. Once you this under control and start working in manual, you will not want to give back control to the camera. Having said that, there may be times where you want to give control back to the camera. An example is for fast moving events, where you don't have the time to set the camera manually for each shot.

The aperture and shutter speed alone are not responsible for how your photograph is achieved. Light sensitivity of the digital sensor or film is also considered. Both digital and film cameras have a setting which allows you to adjust the ISO. ISO is a measure of how sensitive the recording medium - film or sensor - will be to light. The higher the ISO number, the more sensitive it will be to light. Conversely, the lower the ISO number, the less sensitive the sensor, and more light is needed to render your photograph.

The problem at high ISO settings, where only a small amount of light is required by film or sensor, is that a level of noise or grain is introduced into the image. For film the effect is called grain, and gives the appearance of dots which make up the picture. For digital sensors, it is called noise and it can give the appearance like the noise on a TV screen that has little or no reception. While film grain has been used to great visual effect by many photographers, the noise recorded by high ISO settings in digital cameras is a disturbing effect of the medium.

The ISO is indicated by a set of numbers, which for most film and digital cameras, double with each increment in the setting. The camera normally has 100; 200; 400; 800; 1600. Some film cameras go well beyond this to as low as 6 ISO and as high as 6400 ISO. These numbers designate that with each increment or decrement, half or double the amount of light is needed to achieve the same exposure. This is also true of shutter and aperture, so you can see how they all work together. Change one function, and it is necessary to change another to achieve the same exposure.

For example, if you wish to have a long shutter speed to blur the effect of water in a waterfall, you need to slow down the shutter speed. This means you need to compensate for the additional light by stopping down the aperture to correct the exposure. The effect of stopping down the aperture also has its ramifications; it will give greater depth of field (se aperture). This may or may not be desirable in this example. It is something that you must consider though.

2. SHUTTER SPEED

This is all about controlling the length of time the camera's shutter remains open. This is a key area that will improve your photos and allow you visual control well beyond just deciding what your exposure will be.

Shutter speed is one of the three basic controls used to ensure that the correct amount of light is recorded by the camera. This control will result in how light or dark the photograph will be.

The shutter is a set of metallic blades, which is normally situated between the camera's sensor or film plane and the lens.

When a photo is taken, the shutter opens and allows the light traveling through the lens to reach the sensor or film. The period of time for which it remains open is referred to as the shutter speed.

This speed is variable and by lengthening or shortening it, the photographer can change the image dramatically by changing light intensity.

The longer the shutter remains open, the more light is transmitted through the lens. If it is very bright and sunny day, you would normally use a very short shutter speed, and in low light, a much longer shutter speed. But this is not always ideal.

Most modern cameras can automatically adjust this speed, but it is a powerful camera function and is best manipulated by the photographer.

By determining how long the shutter remains open, we are in effect also deciding how much the reality in front of the lens will change while the sensor or film remains active. This allows us to introduce an element of blur into the photograph, and a touch of blur well used, can add visual depth and a sense of movement that is not achievable through any other means.

Using the shutter manually can turn an automatic average photo into an expressive stunning photo.

If you would like to contribute to Online Photography Courses Blog or just look around see Photography Course Blog for more.

Looking for further resources on photography tips, techniques and other resources?
Have a look at:
Online Photography Courses blog
Digital Photography Courses blog
International Photo Contest blog