Frank Michaud, the training officer for the Billings, MT Fire Department decided he needed a new tool for fighting fires safely and efficiently. After researching the piercing nozzles on the market he decided that the tool he needed was not available on the market.

He turned to Wes Nelson, owner of ProFab, Inc., in Billings, MT. The result -- one year and four prototypes later -- is the Patented Fyrestick Piercing Nozzle, which quickly extinguishes fires in walls or attics using a fraction of the water required by traditional methods.
Punch Through a Wall, Ceiling or Car Hood

The Patented Fyrestick, is the worlds leading piercing nozzle. Firefighters use it to punch through a wall, ceiling or car hood and then introduce a mist of water into an enclosed space. When the spray hits the superheated space, it is instantly converted into steam, depriving the fire of oxygen, dramatically lowering the temperature and forcing water into every inch of space.
Quickly Extinguish Fires in Walls or Attics

"Ran it for about a minute and the fire was out"
The piercing nozzle can pump 80 to 100 gallons of water a minute, the steam is so efficient that you might spray water for only 10 or 15 seconds, resulting in far less water damage to the building.

In many cases firefighters, carrying a chain saw or an ax, climb up a ladder, cut through the roof and then stand or squat there with a hose, spraying the attic until the fire is out with 100 PSI trying to push you off of that roof while they are using it

Todays Lightweight Roofs Are Not Safe

With older construction a firefighter had at least 20 minutes, or even a couple of hours, to fight an attic fire before the roof collapsed. However, with builders increasingly moving toward lightweight construction, firefighters nowadays might not have more than a few minutes.

Firefighter Tim Burns explains how the Fyrestick you can put a fire out with a one pierce. The Fyrestick is a tool that no Fire Department should be without, no matter the size or number of fire fighters.
Made in the USA

Fyrestick is made in the USA by Profab, Inc., using only the finest materials, welding and powder coating processes as specified by Fire Departments. This assures you quality construction with years of rigorous use.

The Fyrestick piercing nozzle was designed by Fire professionals for Fire Professionals just like you...