Printable grid paper

The most important optical properties of paper are brightness, colour, opacity, and gloss.

The term brightness has come to mean the degree to which white or near-white papers and paperboard reflect the light of the blue end of the spectrum. This reflectance is measured by an instrument that illuminates paper at an average angle of incidence of 45 degrees and a wavelength of 457 microns. Brightness measured in this way is found to correlate closely with subjective estimates of the relative whiteness of paper.

Opacity is one of the most desired properties of printing and writing papers. Satisfactory performance of such papers requires that there be little or no "show-through" of images from one side of the sheet to the other. Satisfactory opacity in printing papers requires that white mineral pigments be incorporated with the paper stock or applied as a coating.

The terms gloss, glare, finish, and smoothness are used in describing the surface characteristics of paper. The broad term finish refers to the general surface characteristics of the sheet.

Smoothness refers to the absence of surface irregularities under either visual or use conditions. Gloss refers to surface lustre and connotes a generally pleasing aspect. Glare is used for a more intense reflection and a more unpleasant effect. Calendering and coating are important paper-treating methods that affect gloss. Gloss of paper is determined by measuring percent reflectance at a low angle of incidence, 15 degrees (75 degrees from the perpendicular).