Rowenta Steam Irons: Which To Buy?

If you have not used any Rowenta steam irons before and you want to try one out now, the Rowenta Effective Iron (DX1700) is probably the model you should be looking at. The reason being it is less pricey than the rest of the models but it still enjoys a fairly good review from many, many satisfied buyers, unlike say, the Sunbeam Steam Master Iron.

For something that doesn't cost too much, the Effective model is good enough for those who just want a basic iron that does its job well. Meaning it has adequate steam output that takes away wrinkles and glides easily across fabrics. Who wants an iron that tugs and bunches your clothes up while gliding it over, right? Usually, steam and smooth ironing are the factors that help you cut your ironing time and this iron is able to do that pretty well. If you hate ironing, you certainly don't want to spend your time standing at the ironing board for hours. This is why you should invest in an iron that is able to reduce your ironing time by getting rid of wrinkles and creases with as few pushes as possible rather
than having one that requires numerous passes over the garment to make it smooth.

So, if you are looking for Rowenta steam irons that don't cost too much but effective, then you do have to consider, what else, but the Effective model!

The next step up for Rowenta steam irons that are more popular among buyers is the Rowenta Focus Iron (DZ5080). About $30 more expensive than the Effective model based on the usual sale price at the time of writing, the Focus gives you lots and lots of steam, which makes ironing cotton shirts and fabric with stubborn wrinkles a breeze. This means you get to save a lot of time ironing making it less of a chore every week.

This model is also good for those who like a perfectly ironed apparel. Usually, hard to reach areas like pockets, seams and around buttons will still show little wrinkles if you look carefully enough. But with the Focus, it has a high precision tip which makes ironing easy for all hard to reach areas.

This is complimented by the vast number of micro steam holes on its stainless steel sole plate. While most irons have the steam concentrated around the center of the iron, this Rowenta model gives a more even steam distribution and therefore, your clothes come out crisp and nice at less the time required.

As with most Rowenta steam irons, the Focus model is expensive compared to many other clothes irons out there with the more or less the same features. But if you want to finish your chore quicker and with perfectly ironed shirts resulting each time, then you certainly do need to pay the premium Rowenta irons command.

One of the good things about Rowenta steam irons is that there are various models available to suit all budgets. Whether you just want a basic iron or one with a better sole plate, you can find one with the Rowenta brand name. For the Advancer model (DZ9080), you pay the higher price to get a platinum coated stainless steel sole plate.

Basically, the cost of an iron lies in the quality of the sole plate. Some irons are cheap but the heat conduction of the sole plate is hardly acceptable to give even distribution and/or adequate heat. So, if you are asking why should you pay more to get a Rowenta Advancer, the answer is you will be getting a higher quality sole plate. This means when you iron, it shouldn't snag the fabric and you shouldn't feel that you have to exert much pressure to push it along. And it should be hot enough to remove all wrinkles effortlessly.

For a cheaper iron, you might need to make a trade off. For instance, you may have a non-stick iron but it may not be so resistant to scratches or the heat generation may not be as hot as you would like. Yes, the Advancer costs much more but if you don't want an iron with scratches and one that becomes sticky over time, you have to get an iron with a better quality sole plate. And one of those irons is the Rowenta Advancer.

A newer model of the Rowenta steam irons is the Steamium (DW9080). It is slightly more expensive than the Advancer but it is a newer release with improved steam technology. Both the Advancer and Steamium models are 1800-watt irons with platinum-treated stainless steel sole plates and 400 micro steam holes. The main difference is in the steam output.

The Steamium model uses advanced steam force technology. What it means to you is that when you iron, 30% more steam will be released and it will be pushed into the heart of the fabric you are pressing. More steam to loosen the fabric equals faster and easier ironing. The more steam is released by the iron, the quicker and easier it is for you to get rid of the wrinkles and creases.

For Rowenta steam irons, you will notice that each successive model from the cheapest to the most expensive will have a little extra to offer. For the newer Steamium model, this extra is the better steam technology as mentioned. It may be worth it to pay a little more for this newer Rowenta iron if you have a lot to iron every week and most are clothes with stubborn wrinkles.