Saving Money and Energy with Take Charge Smart Power Strips

Ten Top Tips - Do You Believe in Vampires? You'd better. In fact, there are probably several vampires in your home right now, sucking power from your electric.

greenpowersaverstore.com

Outlets and money from your wallet. When your computer, plasma TV, or stereo is off, you probably think it is using as little power as possible. Fact is, These devices have high standby power use. What's more, all of the peripherals connected to your computer- Printer, monitor, USB hub, scanner, DSL/cable modem, etc.-continue to consume "idle current" as well.

There may be as many as 20 devices drawing standby power in your home. These include any device with a remote Control and external power supply (or adapter), permanently illuminated digital displays and LEDs, and many new Larger appliances, such as air conditioners and refrigerators.

Here are our top ten tips to help eliminate everyday Vampire Standby Power In Your Home Today.

1. Turn off your computer at night so it runs only eight hours a day-you'll reduce your energy use by 810 KWh per year and net a 67 percent annual savings.

2. Use a Kill A Watt device to measure your electronics' power consumption. It can actually be kind of fun (and definitely enlightening) to run around your house and see how much juice each piece of equipment takes. You'll likely be surprised.

3. Plug your computer into a surge protector with a master control outlet, which automatically senses When the computer is not in use and cuts power to it and all your peripherals.

4. Purchase flat-screen monitors-they use significantly less energy and are not as hard on your eyes as CRTs.

5. Purchase an Energy Star-compliant computer. Note that laptop models use much less energy than desk top units.

6. Plan your computer-related activities so you can do them all at once, keeping the computer off at other times.

7. Power off your monitor when you are not using it instead of using screen savers.

8. Do not leave the computer running overnight or on weekends.

9. Turn off all printers and peripherals unless you are using them consider using an ink-jet printer-although a bit slower than laser printers, inkjets use 80 to 90 percent less energy.

10. Forgot the screen saver-it doesn't save energy or your screen unless you're using an old monochrome monitor.

According to the Department of Energy, "vampire energy loss" represents between 5 and 8 percent of a single family home's total electricity use per year. On average, that equals one month's electricity bill. Taken across the United States, it adds up to at least 68 billion kilowatt-hours of electricity annually-that's the equivalent output of 37 typical electricity-generating power plants, costing consumers more than $7 billion. The result of all this wasted energy? More than 97 billion pounds of carbon dioxide seeping into the atmosphere each year. On a global scale, standby energy accounts for 1 percent of the world's carbon emissions, according to Alan Meier of the Lawrence Berkeley National Laboratory in California

http://www.greenpowersaverstore.com/

Do you find yourself dreading your electricity bill each month when it arrives? Do you express surprise at the amount you see when you open the envelope? Do you have to sit down and figure out how that number was computed, because for you it's just too much?

People have a tendency to underestimate the amount of electricity they use especially when there are so many ways it is wasted. In fact, appliances and electronic devices still use up electricity even when switched off! Whatever name it's called "AC"idle current, phantom load "it's still consumed energy you have to pay for, yet don't use.

It's time to put a stop to wasted electricity with the use of smart power strips. A smart power strip is a very helpful device that cuts off the flow of electricity to appliances when they're plugged in yet turned off. Smart power strips look like your typical multi-socket power extension and they work the same way to a point; however, a smart power strip recognizes when you've turned off your appliances. At that point, the smart power strip completely turns off your devices as if you unplugged them from the wall. Your gadgets and appliances will not eat up idle current.

Smart power strips are able to recognize when your appliances are switched off because they are programmed to remember the usual flow of electricity running through your devices when switched on. Thus, when you switch off your devices, the amount of current changes and this change is the trigger that sets the smart power strip into action.

Of course, why is there a need for smart power strips if you can just unplug your appliances? Although the best way to stop idle current is to unplug all your devices when not in use, it's not practical to do so every single time. What if the plug for your TV goes all the way to the back and you have to move the whole thing to the side just to be able to reach it? What if you were really sleepy and forgot to unplug your DVD player? Those scenarios are just two examples in which you end up paying for wasted electricity when you shouldn't have to. Why take the chance? It's better to use a smart power strip so that you don't have any worries after you turn the switch off your say your computer. Aside from nipping idle current in the bud, smart power strips also prevent power surges that regular power extensions can't do. It's a benefit that will help your appliances have a longer life because of the added protection

A smart power strip is an affordable tool to add to your how-to-save-more-money arsenal. Different kinds of models exist with varying numbers of sockets. Whatever your requirements are, there's a model that suits your exact needs.

Electricity bill are rising. Now you can cut down on costs and find out what appliances are actually worth keeping plugged in. Simply connect these appliances to the Kill A Watt®, and it will assess how efficient they really are. Large LCD display will count consumption by the Killowatt-hour, same as your local utility. You can calculate your electrical expenses by the day, week, month, even an entire year. Also check the quality of your power by monitoring Voltage, Line Frequency, and Power Factor. Now you´ll know if it is time for a new refrigerator or if that old air conditioner is still saving you money. With the amazing Kill A Watt® you´ll know.
The Kill-A-Watt Power Consumption Meter is a device that measures the amount of electricity various household electric appliances use.
How does it work?
The device plugs into any standard wall outlet and then "reads" the energy use of the appliance plugged into it. To measure the amount of electricity a certain device uses, plug it into the Kill-A-Wat. The device wil lmeasure kilowatt hours (kWh) used over the period of time. The device will measure energy use in watts and translate that into kilowatt hours (kWh) for you. 1000 watts = 1 kilowatt; a 100 watt device running for 10 hours = 1 kWh. NSTAR bill you (in kilowatt hours (kWh).
Example - Plug in a lamp with a 60 watt bulb to the device and turn it on. Press the button on the device labeled "watts" and the LCD screen should read 60 watts. To track how much energy is consumed over time, press the "kWh" button and toggle to see energy consumed over a time period. If the light were to remain on for 10 hours, the device would read 0.6 kWh consumed. Be sure to record the kilowatts displayed on the device while it is still plugged in. They will disappear when the Kill-A-Watt is unplugged. Multiply the kWh by the rate charged on your utility bill to find out how much it costs to keep the device running. When you have identified the devices and appliances that do not need to be kept plugged in, unplug them after each use. Or, plug them into a power strip with an on-off switch and power that off when devices are not in use. You can also replace the standard power strip with a smart power strip that will shut off and eliminate Vampire power.
Example of an idle device: A standard cell phone consumes about 5 watts when charging and 1 watt when not charging (if the power cord remains plugged in). Over a year, that comes out to 1.8 kWh for charging and 8.3 kWh for the power cord.
The Kill-A-Watt meter plugs into a power outlet, and then an appliance to be measured plugs into the Kill-A-Watt meter, as illustrated in the photo to the right. The power being consumed is displayed by the meter (59 watts, in the photo to the right).
The meter can also measure 'power factor' (for appliances containing motors) and energy consumption (kWh).
A watt (W) is a measure of energy per unit of time (power). 1 watt = 1 joule/second.
A watt-hour (Wh) is a measure of energy. 1 watt-hour = 3600 watt-seconds = 3600 joules. Electrical energy is billed by the kilowatt-hour (kWh).

Power, energy,green,monitor energy, power consumption, smart power strip,energy saving, recycle, energy use, measure power consumption,measure power consumption, Kill-A-Watt Power Measurment, Kill-A-Watt Power Meter

Money Saving Tips Save Energy and Money Today

Did you know that the typical U.S. family spends about $1,900 a year on home utility bills? Unfortunately, a large portion of that energy is wasted. Simple changes outlined in the tips below can help reduce your energy costs and save you money. It can also help reduce your carbon footprint and have a positive impact on the planet. Each year, electricity generated by fossil fuels for a single home puts more carbon dioxide into the air than two average cars. Even a top-of-the-line, energy-efficient furnace will waste a lot of fuel if the ducts, walls, attic, windows, and doors are not properly sealed and insulated. Taking a whole-house approach to saving energy ensures that dollars you invest to save energy are spent wisely.
Vampire Standby Power

According to the Department of Energy, "vampire energy loss" represents between 5 and 8 percent of a single family home's total electricity use per year. On average, that equals one month's electricity bill. Taken across the United States, it adds up to at least 68 billion kilowatt-hours of electricity annually-that's the equivalent output of 37 typical electricity-generating power plants, costing consumers more than $7 billion. The result of all this wasted energy? More than 97 billion pounds of carbon dioxide seeping into the atmosphere each year. On a global scale, standby energy accounts for 1 percent of the world's carbon emissions, according to Alan Meier of the Lawrence Berkeley National Laboratory in California.

When your computer, plasma TV, or stereo is off, you probably think it is using as little power as possible. Fact is, these devices have high standby power use. What's more, all of the peripherals connected to your computer - Printer, monitor, USB hub, scanner, DSL/cable modem, etc.-continue to consume "idle current" as well. There may be as many as 20 devices drawing standby power in your home. These include any device with a remote control and external power supply (or adapter), permanently illuminated digital displays and LEDs, and many new larger appliances, such as air conditioners and refrigerators.

Did You Know? 10% to 20% of the average American electric bill is from Energy Vampires - those electronics and other electrical devices that continue to use power when you think the device is off! With a small consumer purchase ranging from $24-$29.95, you can not only stop vampire power, you will protect electronics with surge suppression and the smart power strip will pay for itself in 3 to 6 months.

How to Recognize an Energy Vampire:

Anything with a transformer "chunky" plug, an LED indicator light or an LED clock, or charging capability is an Energy Vampire. This includes computers and peripherals, entertainment center electronics, cell phone chargers, cordless phones, many coffee makers, microwave ovens...Take Charge offers three distinct products designed to reduce power consumption with auto power sensing, one button 3 hour timers and built in surge suppression.

Perhaps the best of both worlds can be found in Take Charge's Power Saver line. These surge suppressors don't have remote controls, but do feature a time able outlets that automatically turn off when the reset button is activated for timed charging, plus they offer an always-on "hot" outlet and surge protection.

Consumer Benefits of Timed Charging
1. Increased Battery Life Cycle
2. Electrical Consumption savings
3. Reduce Green House Gases
4. Provide cell charger with automatic cut off

Take Charge Smart Surge Protectors Help to Stop Idle Power and You Can Save Over $50 Per Year
The Take Charge Power Saver eliminates the loss of electricity caused by phantom power. By docking your electronic charging devices to Take Charge Smart Power Outlets you are saving energy and money!

The Take Charge Power Saver features 10-Amp smart outlets that automatically turn off power to your charging devices. Plus, with the added feature of surge protection, your electronics are safe from damaging electrical surges caused by lightning or random power grid pulses.
The explosion of high-tech personal electronics has demanded the need for more electricity. These devices need regular re-charging. Often, the charging device remains plugged in even after being fully charged. This is a unnecessary waste of energy and money.
When plugged in and unattended, charging devices are still using precious energy known as phantom power. Take Charge Smart Power Outlets turns off your chargers and stops the phantom power waste.

Eliminating phantom power loss is not only smart it is helpful to the environment. By eliminating the expense of lost power you will soon recoup the cost of your Take Charge Smart Power Outlets, You can order all Take Charge products at http://greenpowersaverstore.com

How To Eliminate and Reduce Vampire Power or Second Hand Power Loss

What is Vampire Energy Loss?
Call it what you will: phantom load, idle current, vampire power, wall wart; they're all euphemisms for the way devices use and waste electricity when they aren't even on, and they're everywhere. Here are some ways to save some bucks and carbon emissions and gain some peace of mind by eliminating unnecessary power Vampire Energy Loss

Vampire Energy Loss in the U.S. Today
According to the latest estimates, about 5 percent of the electricity used in the United States goes to standby power, and costs the United States about $4 billion a year. This percentage, however, is on the rise, and it may reach 20 percent by 2010, according to the U.S. Department of Energy.

You may be surprised to find out that those camera, cell phone, and iPod power adapters you leave plugged in all the time suck power from the outlet even after you've disconnected the devices you were charging. As long as you leave the adapter plugged in, you're losing an average of twelve watts.

Vampire Energy Loss Adds Up Fast In Your Home
Add that all up, and you get about 68 billion kilowatt-hours of electricity wasted a year. That amounts to the electricity generated by 37 power plants, at the expense of over 97 billion pounds of carbon dioxide released into the atmosphere. A TV with a remote may use more energy during the 20 hours it is turned off than it does for the four hours you watch it in the evening, according to the Department of Energy.

Vampire Energy Loss Cost Billions
The average VCR in standby mode costs you over $10 a year. Your cordless phone base station just over $3. Taken alone, that doesn't sound particularly alarming, but it adds up. A plasma TV costs nearly $160 a year, just to run it in standby mode. Your computer? About $34. And your game console around $26 That tiny clock on your coffee pot is a classic example of something that uses vampire energy. To save money and natural resources, unplug it when you're not using

Portable Electronics compound Vampire Energy Loss
Multiple cell phone chargers, PDA's Ipods , Game Boy and Laptop chargers all contribute to Vampire energy loss everyday in your home. All of these adaptors "suck" energy 24 hours 7 days a week, as long as they are plugged into the your home's ac power.

Go Green, Save Energy, Money and Power in Your Home, Office or on the go. We offer a large selection of Energy Saving and Earth Friendly Eco Products that help to save our natural resources and minimize your carbon footprint. We offer a large selection of Power saving Smart Power Strip Surge protectors that help reduce standby power and eliminate vampire power consumption. Green Power Saver Store.com also offers a wide array of Solar Power alternatives products for use with iPad, eBooks and iPhone mobile phones in addition to the R3 Recycling Mobile Phone Electronics Trade in Program for consumers.

Check out all of our power saving smart strips and products at: http://greenpowersaverstore.com