Saving Time And Energy When Using The Paslode Framing Nailer IMCT

The entire set-up of this amazing nail gun is as straightforward as inserting the battery, a fuel cell, and a nail strip and you're simply ready to nail. This can save you approximately sixty minutes every day not having to breakdown compressors, hoses as well as to seek out an electrical supply

The IMCT nailer will handle nail sizes between 2 to 3 1/4 " so that it is suitable for many types of framing. Whether it's 2"x 4" or 1 1/2" x 4" lumber this gun has the ability to move to a different dimension nail. Basically withdraw the follower rod and remove the strip you are using. Enter a strip of the new size and away you go. Nails come in 48-nail collated paper strips which are a piece of cake to load and unload.

Nails are driven by a ultra powerful linear drive internal combustion generator, powered by a throw-away fuel cell. The power this particular gun supplies will drive a nail perfectly in to the hardest of lumber in addition to laminated supports. Every fuel cell is going to fire in the order of 1200 nails per cell.

A easily removed, chargeable battery drives the nail guns electronics to give you reliable operation even with major nailing tasks. An included stand-alone battery charger will require roughly two hours to completely recharge the battery pack. A completely energized electric battery will work for about four thousand nails. By using a spare battery and lots of fuel cells, this gun can be used continually while driving an average of one nail every 2 seconds.

A further impressive time-saving function is the tool-less depth-of-drive adjustment. You don't require a wrench to modify the depth. Just remove the battery from the nail gun, after which manually modify the depth stop on the front of the tool. This be adjusted either upwards or downwards to the suitable depth to either under or over drive of the nail.

All detailed and service information are provided in an straightforward, well-illustrated users handbook. There are several online resources such as paslodereview.com to make certain that your nail gun is used and taken care of properly. As a result provide you with countless numbers of hours of trouble free nailing.

The IMCT framing nailer additionally will save time when you really need to nail in small rafter corners or squeeze in to other confined areas. The unit is light-weight and drives nails in perfectly when held in just about any position, and there's no hose to drag behind you and over obstacles.

The Paslode IMTC weighs under 7 pounds, so really does not require lots of effort to work with day after day. This saves arm and wrist fatigue when nailing all day long, specifically when working over your head.

The Paslode Framing Nailer IMCT can be a massive time-saver on huge and modest framing projects. For weekend small jobs, it will be the primary nailer you will ever require. For big day to day projects, it's easy set-up and portability makes it an excellent replacement to compressor based nailer's.