ScanGauge II 3-in-1 Multifunction Vehicle Computer, Best Buy, Auction Deals!

With 12 built-in gauges, four can be displayed at once, the ScanGaugeII can help determine fuel consumption rates, allowing you to adjust driving behavior and save gas. At the same time, keep an eye on coolant temperature, engine speed, and much more in real time.

• 3-in-1 automotive trip computer, diagnostic scan tool, and 12 digital gauges in one
• Watch fuel consumption, coolant temperature, engine speed, and much more in real time
• Works on 1996 or newer OBDII cars, including gas, diesel, propane and hybrid vehicles
• Checks for Diagnostic Trouble Codes (DTCs), clears the codes, and turn off the "Check Engine" light
• No tools required for installation, small size fits nearly anywhere in the vehicle

The ScanGaugeII can help determine fuel consumption rates, allowing you to adjust driving behavior and save gas. At the same time, keep an eye on coolant temperature, engine speed, and much more in real time. If there is a young driver in the house or friends borrow your car, the ScanGaugeII can record speeds of up to 158 mph and store the information for you to view later, so you will know just how fast your young driver or friend was going last night. If the unit was disconnected, you'll know: An indicator will be displayed in the trip data.

The ScanGaugeII includes a diagnostic scan tool that can check for Diagnostic Trouble Codes (DTCs), clear the codes, and turn off the "Check Engine" light on 99% of 1996 and newer vehicles. (However, this feature may not work on some trouble codes in Dodge vehicles.) If any DTCs are found, the ScanGauge will show how many there are as well as the codes themselves. Then you can use the Internet or repair manual to find out which is the failed part is, so you can repair it yourself or know what needs to be fixed at the mechanic's shop.

Four sets of data are automatically recorded on the trip computer: Current, Today, Previous Day, and Tank Trip. The "current" trip restarts after the engine has been off for more than 3 minutes. The "today" trip restarts after the vehicle has not moved for 9 hours, and the data from "today" is moved to "previous day" when you restart the car, so you don't have to reset the computer every time you begin a trip. "Tank trip" resets when you fill up the tank. It can provide you with "to empty" data and other useful information, which can be viewed any time during the trip.

The ScanGaugeII has been redesigned with expandable Add-A-Gauge (aka XGauge) technology. Add to the original 12 gauges by customizing the ScanGaugeII to monitor up to 25 more--depending on your specific vehicle's sensor design. Four gauges can be displayed simultaneously and can help determine fuel consumption rates, allowing you to adjust driving behavior and save gas. At the same time, keep an eye on coolant temperature, engine speed, and much more in real time. If there is a young driver in the house or friends borrow your car, the ScanGaugeII can record speeds of up to 158 mph and store the information for you to view later, so you will know just how fast your young driver or friend was going last night. If the unit was disconnected, you'll know: An indicator will be displayed in the trip data.

Gauges include:

* Horsepower
* Fuel Consumption Rate to 1/100th per gallon/liter
* Vehicle speed (MPH)
* Fuel Economy
* Cost Per Mile/Cost Per Trip
* Manifold Pressure (not available on some vehicles)
* Battery Voltage
* Engine Load
* Coolant Temperature
* Throttle Position
* Intake Air Temperature
* Ignition Timing
* Engine Speed (RPM)
* O2 Sensor Data
* Fuel Trim
* Hybrid Battery Charge (for Toyota Prius and Ford Escape)
* And many more, depending on your vehicle's sensor design