Screwpull Corkscrew and Wine Opener

Remove the foil capsule by cutting around the rim with either a foil cutter or the corkscrew.

With the bottle on a hard, flat surface at chest level or lower. Lower the arms of the corkscrew. Holding the corkscrew as vertically and straight as possible, place the sharp end directly into the middle of the cork.

Securely grasp the top of the bottle and the lower end of the corkscrew with one hand.

With the other hand, begin turning the handle of the corkscrew clock-wise, applying an even, constant downward pressure into the cork. As the corkscrew goes into the cork, its arms will begin to rise.

Keep turning the handle until the arms of the corkscrew are completely raised and the screw is well into the cork.

With one hand on each arm of the corkscrew, press the arms down. This will lift the cork out of the bottle.

Wrap your hand around the base of the corkscrew and lift straight up.

Twist the cork off the corkscrew to reinsert back into the bottle or use a wine bottle stopper.

Wipe the rim of the bottle with a clean, damp towel before serving, to remove any stray pieces of cork and, more important, any lead left by the foil.

Screwpull LM-200 Lever Style Corkscrew

Personalized Screwpull LM-400 Lever Corkscrew

Screwpull Lever Model Elegance Corkscrew

Screwpull Trilogy Twist Style Table Corkscrew (Black)

Screwpull Original Table Model Twist Style Corkscrew

Screwpull Waiter Style Corkscrew

Screwpull Table Model Corkscrew Set (Black)

Screwpull LM-400B Lever Corkscrew

Screwpull Trilogy Twist Style Pocket Corkscrew

Screwpull Champagne Cork Catcher

wine-aerobics



Uncork & UnWind