Xtratherm Facts & Figures

Xtratherm makes insulation products which are useful for floor insulation, wall insulation, pitched roof insulation, and flat roof insulation.
Xtratherm makes great energy saving insulation by creating polyisocyanurate insulation. Polyisocyanurate insulation is a thermosetting plastic, and a closed-cell foam which contains increadibly ow-conductivity gas inside its cells. Because of the extremely high thermal resistance the gas allows polyisocyanurate insulation this type of insulation usually has a especially high R-value of R-5.6 to R-8 per square inch. This insulation good is available as a liquid, sprayed foam, or rigid foam board. Xtratherm insulation is made as rigid urethane foam boards. Conversely, the sprayed foam version of polyisocyanurate insulation is normally of lower cost than rigid foam boards, and they usually work better as the liquid foam moulds to all the surfaces. The disadvantage of this material is that over time, thermal drift occurs and some of the gas is replaced with air, which drops the R-value of the insulation. The most thermal drift usually occurs within the first two years of installation, and then it remains the same. Polyisocyanurate insulation is a great insulator because even though the R-value drops, it starts off at a especially high value, and therefore the drop will not affect your residence at all.
Additionally another great insulation material that is supplied by Xtratherm is the Dow Floormate which is intended for the insulation of floors and parking decks which are subject to astoundingly high loadings. The Dow Floormate is blue extruded polystyrene insulation which is blown with carbon dioxide. This product has absolutely no impact on the ozone layer and is increadibly positive for the globe.
Xtratherm insulation is also good for pipe insulation. Pipe Insulation is for the thermal and acoustic insulation of copper and steel pipes operating at up to 230°C. Pipe insulation is a single piece of "snap on" mineral wool that is made from non-combustible, glass mineral wool. This material also provides a extraordinarily powerful vapour layer which stops the inside of the pipes from being damaged, and the external part of the pipes from being affected by any liquid. Pipe Insulation can be used up to continuous operating temperatures of 230°C and down to cryogenic temperatures provided that a 100% vapour barrier is maintained. The surface temperature of the facing shouln't exceed 80°C. This form of insulation doesn't diminish, doesn't allow vermin to survive, and doesn't encourage the promotion of fungi, viruses or mould. Pipe insulation from the manufacturer is perfect and is ideal for usage if insulating pipes.
Xtratherm Insulation is a good insulation manufacturer and if insulating, should be considered and compared to other companies. It is most likely that the Xtratherm insulation materials will be far better than other products due to the quality of the good created, as well as the quality of the effort put into the insulation.